Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Description
Eliminate Scratches & Reduce Fingerprints! Are you like other drivers who want their car to always look its best? Screen ProTech understands you and wants to help! Thanks to their exclusive design process, we are able to create protection patterns for your vehicle’s cluster and infotainment screen that are accurate within millimeters!
All Screen ProTech products are custom laser-cut specifically for your Toyota Tacoma, ensuring a perfect fit.
Included
High quality, durable proprietary film specifically for the screens that is easy to install with nearly invisible lines.
Microfiber/Glass Towel, Squeegee, and Mini Mister w/ Solution (just add water!)
Features
Fingerprint Reduction
HD Clarity
Protection from scratches and damage
8 Mil Thickness
How to Install 1. Screens should be cool to the touch (70 degrees inside the cab) 2. Fill bottle with warm water 3. Spray surface, wipe surface 4. Spray surface, use squeegee to remove dust particles 5. Spray surface 6. Lift edge of film to be installed, spray edge, spray as you separate film from backing 7. Saturate back of film, more solution = easier to set properly & easier to squeegee 8. Adjust and align softly with fingertips 9. Use squeegee in center of film with small strokes to tack 10. Lightly mist top of film 11. Squeegee from center of film to right, switch hands (if possible), squeegee from center to left working up and then down the film 12. Wrap towel around squeegee, and then squeegee from center to edges (clockwise or counter clockwise) around all edges 13. Use towel to wipe excess moisture 14. REPEAT with additional film/trim
If there is dust or excessive remaining bubbles, mist edge of film and GENTLY lift while spraying (to avoid breaking the adhesive) until film is lifted past dust/bubbles/etc. Respray, re lay down the film, re mist, then squeegee from inner-most lifted part outwards, using techniques above.
If there is dust or excessive remaining bubbles, mist edge of film and GENTLY lift while spraying (to avoid breaking the adhesive) until film is lifted past dust/bubbles/etc. Respray, re lay down the film, re mist, then squeegee from inner-most lifted part outwards, using techniques above.
For Kits with buttons or small pieces, install everything else first, empty bottle, and fill with plain water for better tacking!
Moisture bubbles are normal to appear up to 2 days after installing and will dissipate within 7 to 14 days. (Cold weather may extend cure time)
Additional Information
Extra sets apply to nav clusters, radio displays, and shifter sections
