The Blaze Off-Road Complete Power System for the 2022-2026 Toyota Hybrid Tundra is designed to solve one of the biggest electrical challenges with Toyota’s new hybrid trucks — the rear-mounted 12V battery. While this design has its advantages, it makes adding aftermarket accessories much more difficult using traditional wiring methods. Blaze Off-Road developed this system to provide a clean, safe, and installer-friendly way to bring usable accessory power to the engine bay.
This complete power relocation system allows you to properly route power from the rear battery to the front of the truck while providing a professional foundation for accessory control using systems like the Garmin PowerSwitch. Designed as a weekend project for experienced DIY installers, this kit gives you the core electrical infrastructure needed to build a serious overland or off-road electrical setup.
Features
Designed for Hybrid Tundra Models (2022-2026): Engineered specifically for Toyota Tundra hybrid platforms with rear-mounted batteries.
Complete Power Relocation System: Safely routes power from the rear battery to the engine bay for easier accessory wiring.
Garmin PowerSwitch Integration: Optional configurations include up to two Garmin PowerSwitch units for advanced accessory management.
Professional Power Distribution Components: Includes Blue Sea Systems ground bar for organized electrical connections.
Complete Wiring Solution: Includes power cables, pass-through hardware, fuse protection, and mounting components.
Sealed Power Pass-Through System: Provides a clean and weather-resistant method for routing power outside the vehicle.
DIY Friendly Design: Designed for experienced installers to complete installation at home.
Expandable Electrical Platform: Perfect for lighting, air compressors, onboard air, radios, and overland accessories.
Includes
Depending on configuration, this system includes:
Garmin PowerSwitch units (up to two depending on kit selection)
Blue Sea Systems ground bar
Power cables from rear battery to pass-through location
Power cables from pass-through to under-hood mounting location
Sealed power pass-through hardware
Required fuse protection
Mounting hardware and installation components
Note: The Complete Installation Kit option includes all wiring and hardware but does NOT include Garmin PowerSwitch electronics.
Important Installation Information
Advanced Installation Required
Installation requires drilling two 1-5/16" holes through the vehicle to properly install the sealed power pass-through system. This method was selected as the safest and cleanest way to route power from the rear battery.
Installation considerations:
Requires use of a drill and hole saw
Permanent modification required
Recommended for experienced DIY installers
Professional installation recommended if unsure
Lead Time
Estimated Lead Time: 8–10 weeks (Built-to-order electrical systems)
Summary
If you're planning to build a serious electrical system on your Hybrid Tundra, the Blaze Off-Road Complete Power System provides the proper foundation to do it right. With quality components, a clean power routing solution, and expansion capability for future upgrades, this kit makes building a reliable accessory power system significantly easier.
Customization
If this product offers customization, please include all requested details in the product options or cart notes where applicable.
Important: We do not produce, apply, or fulfill any customizations that include Toyota®, Lexus®, or any other OEM trademarks, logos, or brand identifiers. Any such requests will be declined or modified to comply with trademark guidelines.
All customized items are made-to-order and are non-refundable and non-returnable once production has begun.
For design-related questions, please contact us at sales@aspireautoaccessories.com.
Notice of Non-Affiliation
Aspire Auto Accessories is an independent aftermarket company and is not affiliated with, associated with, authorized by, endorsed by, or in any way officially connected with Toyota Motor Corporation®, Lexus®, or any of their subsidiaries or affiliates.
All manufacturer names, vehicle names, trademarks, logos, and images are the property of their respective owners and are used for identification and compatibility purposes only.
Use of these names, trademarks, and brands does not imply any affiliation or endorsement. Any products sold by Aspire Auto Accessories are aftermarket products and are not manufactured or approved by Toyota Motor Corporation® or Lexus®.
Disclaimer
Any Toyota products listed on Aspire Auto Accessories is an aftermarket product and not OEM. The user/installer assumes all liability in using this product.
INSTALLATIONS
All products built and designed by Aspire Auto Accessories are intended for off-road use and should be assembled, installed, and used according to Manufacturers recommendations. Aspire Auto Accessories products should be used safely with good judgment towards others and the environment. By installing Aspire Auto Accessories products on your vehicle you assume all liability. Aspire Auto Accessories will not be held liable for damages or loss associated with the installation or use of its products.Be smart, use good judgement, and be safe***
WARNING
Neither the seller nor the manufacturer will be liable forany loss, damage, or injury directly or indirectly arising fromthe use of or inability to determine the use of these products. Before using,the user shall determine thesuitability of the product(s) for its intended use(s), andthe user shall assume allresponsibility and risk inconnection therewith.
Warranty
At Aspire Auto Accessories, we stand behind our customers and are committed to helping resolve any product-related issues quickly and efficiently. If something isn’t right, our team is here to help every step of the way.
All products sold on our website are backed by the original manufacturer’s warranty. Warranty coverage, terms, and duration may vary depending on the manufacturer. We work closely with our vendors to help streamline the process and get your issue resolved as smoothly as possible.
If you need to start a warranty claim, please contact us at sales@aspireautoaccessories.comwith your order number and a description of the issue. Our team will guide you through the next steps and, when necessary, coordinate directly with the manufacturer on your behalf.
Please note:
Warranty claims are subject to the manufacturer’s terms, conditions, and approval.
Damage caused by improper installation, misuse, accidents, or normal wear and tear is not covered.
Labor costs, installation fees, and third-party modifications are not covered under warranty.
Proof of purchase is required for all warranty claims.
In some cases, customers may be required to work directly with the manufacturer to complete the claim.
Our goal is simple: keep you on the road (or trail) with confidence.
Shipping & Returns
Shipping
We want you to get your products as soon as possible. That's why we make every effort to process and ship your order as quickly as possible. All updates will be sent directly to your email automatically. If you have an order placed and would like to track your order at anytime, please gohere. Feel free to contact us by phone or email at any time to get updates from our customer service team.
To read our frequently asked questions and for more inforrmation on our shipping policy, please go here.
Returns and Exchanges
We want you to be sure you're as happy with your Aspire Auto Accessories products and other brands we offer as we are. If you are not satisfied with your purchase, you have 30 days after your purchase to return or exchange your item(s). Please use our portal to start your return or exchange. Go here tovisit our portal.
Important note all sale items are final sale. No returns or exchanges can be given. Any used or opened products are not eligible to be returned. Please confirm vehicle fitment before purchase. Additional restocking fees may apply depending on product vendor.
To read our frequently asked questions and for more information on our return & exchange policy, please go here.
