Restore proper rear suspension geometry and eliminate unwanted axle shift with the Dr. KDSS B.O.T.C.K. (Bolt-On Track Bar Correction Kit) for the 2022-2026 Toyota Tundra. Specifically designed for the Gen 3 Tundra’s 5-link rear suspension, this bolt-on solution corrects track bar angles after lifting your truck, helping your rig track straight and stay planted both on the highway and on the trail.
When a Tundra is lifted, the panhard bar angle becomes steeper, which forces the rear axle to shift side-to-side instead of cycling naturally up and down. The B.O.T.C.K. kit corrects this by raising the pivot point, bringing the track bar closer to level and restoring predictable handling. No welding required—just smart engineering and real-world performance.
Features
Corrects Rear Axle Geometry: Repositions the track bar mounting point to reduce lateral axle movement caused by suspension lifts.
Improves Stability & Handling: Helps eliminate the unstable rear-end feel common after lifting your Tundra.
True Bolt-On Design: No welding required for installation, making it accessible for DIY installers and professional shops alike.
Works With KDSS & Non-KDSS Models: Compatible regardless of suspension configuration.
Strength-Focused Engineering: Designed to distribute load across the factory mount rather than relying solely on weld strength.
Adjustable Mounting Positions: Multiple mounting positions allow proper correction based on lift height.
Corrosion-Resistant Hardware: Zinc-coated hardware helps ensure durability in harsh environments.
How to Choose the Correct Version
To determine the correct setup:
Park on level ground
Measure from the ground to the center of the frame-side track bar bolt
Measure from the ground to the center of the axle-side track bar bolt
Subtract the two measurements
Lift height recommendations:
1.5"–2.99" difference: Shorty version (or bottom hole on standard bracket)
3"+ difference: Standard version (top hole recommended)
Tip: Planning future suspension upgrades? The standard version offers more adjustment range.
Installation Notes
Torque all hardware to 105 ft-lbs
Use blue thread locker (red optional for extreme use)
No washer required on side bolt (updated design)
Updated hardware now uses standard hex nuts
What’s Included
Front bracket
Rear bracket
Flag nut
(1) M14 x 1.5 x 75mm flange head bolt
(1) M14 x 1.5 x 80mm flange head bolt
(2) M14 x 1.5 x 35mm flange head bolts
(1) M14 hex nut
Zinc-coated mounting hardware
Summary
If you've lifted your 2022-2026 Toyota Tundra, the Dr. KDSS B.O.T.C.K. Track Bar Correction Kit is an essential upgrade to restore suspension geometry, improve stability, and maintain confident handling. With a durable bolt-on design and no welding required, it's a smart upgrade for Tundras that actually see real trail use—not just pavement.
Customization
If this product offers customization, please include all requested details in the product options or cart notes where applicable.
Important: We do not produce, apply, or fulfill any customizations that include Toyota®, Lexus®, or any other OEM trademarks, logos, or brand identifiers. Any such requests will be declined or modified to comply with trademark guidelines.
All customized items are made-to-order and are non-refundable and non-returnable once production has begun.
For design-related questions, please contact us at sales@aspireautoaccessories.com.
Notice of Non-Affiliation
Aspire Auto Accessories is an independent aftermarket company and is not affiliated with, associated with, authorized by, endorsed by, or in any way officially connected with Toyota Motor Corporation®, Lexus®, or any of their subsidiaries or affiliates.
All manufacturer names, vehicle names, trademarks, logos, and images are the property of their respective owners and are used for identification and compatibility purposes only.
Use of these names, trademarks, and brands does not imply any affiliation or endorsement. Any products sold by Aspire Auto Accessories are aftermarket products and are not manufactured or approved by Toyota Motor Corporation® or Lexus®.
Disclaimer
Any Toyota products listed on Aspire Auto Accessories is an aftermarket product and not OEM. The user/installer assumes all liability in using this product.
INSTALLATIONS
All products built and designed by Aspire Auto Accessories are intended for off-road use and should be assembled, installed, and used according to Manufacturers recommendations. Aspire Auto Accessories products should be used safely with good judgment towards others and the environment. By installing Aspire Auto Accessories products on your vehicle you assume all liability. Aspire Auto Accessories will not be held liable for damages or loss associated with the installation or use of its products.Be smart, use good judgement, and be safe***
WARNING
Neither the seller nor the manufacturer will be liable forany loss, damage, or injury directly or indirectly arising fromthe use of or inability to determine the use of these products. Before using,the user shall determine thesuitability of the product(s) for its intended use(s), andthe user shall assume allresponsibility and risk inconnection therewith.
Warranty
At Aspire Auto Accessories, we stand behind our customers and are committed to helping resolve any product-related issues quickly and efficiently. If something isn’t right, our team is here to help every step of the way.
All products sold on our website are backed by the original manufacturer’s warranty. Warranty coverage, terms, and duration may vary depending on the manufacturer. We work closely with our vendors to help streamline the process and get your issue resolved as smoothly as possible.
If you need to start a warranty claim, please contact us at sales@aspireautoaccessories.comwith your order number and a description of the issue. Our team will guide you through the next steps and, when necessary, coordinate directly with the manufacturer on your behalf.
Please note:
Warranty claims are subject to the manufacturer’s terms, conditions, and approval.
Damage caused by improper installation, misuse, accidents, or normal wear and tear is not covered.
Labor costs, installation fees, and third-party modifications are not covered under warranty.
Proof of purchase is required for all warranty claims.
In some cases, customers may be required to work directly with the manufacturer to complete the claim.
Our goal is simple: keep you on the road (or trail) with confidence.
Shipping & Returns
Shipping
We want you to get your products as soon as possible. That's why we make every effort to process and ship your order as quickly as possible. All updates will be sent directly to your email automatically. If you have an order placed and would like to track your order at anytime, please gohere. Feel free to contact us by phone or email at any time to get updates from our customer service team.
To read our frequently asked questions and for more inforrmation on our shipping policy, please go here.
Returns and Exchanges
We want you to be sure you're as happy with your Aspire Auto Accessories products and other brands we offer as we are. If you are not satisfied with your purchase, you have 30 days after your purchase to return or exchange your item(s). Please use our portal to start your return or exchange. Go here tovisit our portal.
Important note all sale items are final sale. No returns or exchanges can be given. Any used or opened products are not eligible to be returned. Please confirm vehicle fitment before purchase. Additional restocking fees may apply depending on product vendor.
To read our frequently asked questions and for more information on our return & exchange policy, please go here.
