Keep your auxiliary electrical system clean, organized, and easy to service with the TEQ Customs Underhood SwitchPro / Power Distribution Mount. Designed for 4Runner, FJ Cruiser, GX470, and GX460 applications, this heavy-duty underhood mounting solution provides a centralized location for your SwitchPro power module and optional Blue Sea Systems power distribution components.
Rather than having individual accessory wires and connections scattered throughout the engine bay, the TEQ Customs mount provides dedicated space for a SwitchPro power module, Blue Sea ground bus bar, and Blue Sea 8-position terminal block.
When configured with the terminal block, each SwitchPro circuit can be connected to an individual terminal while your auxiliary accessories connect to the adjacent terminals. This creates an organized distribution point that makes adding, removing, troubleshooting, or reorganizing accessories significantly easier.
Features
- Organizes auxiliary lighting and accessory wiring under the hood
- Dedicated mounting location for a SwitchPro power module
- Space for a Blue Sea ground bus bar
- Space for a Blue Sea 8-position terminal block
- Helps simplify future accessory additions and wiring changes
- (2) Integrated wiring pass-throughs keep wiring within the mount's footprint
-
Heavy-duty 3/16" steel construction
-
Durable black powder-coated finish
- Vehicle-specific mounting design
- Multiple package configurations available
Specifications
- Material: 3/16" Steel
- Finish: Black Powder Coat
- Installation Location: Engine Bay / Underhood
- Wiring Pass-Throughs: 2
- Switch System Compatibility: Designed around SwitchPro power modules
- Power Distribution Compatibility: Blue Sea terminal block and ground bus bar
Available Packages
Mount Only
The standard configuration includes the components needed to install the underhood mounting platform.
Includes:
- (1) TEQ Customs SwitchPro Underhood Mount
- (2) 10mm Mounting Bolts
- (2) 1/2" Spacers – for applicable 2003–2009 4Runner models
SwitchPro system, terminal block, ground bus bar, and related electrical components are not included with the Mount Only option.
Mount + Blue Sea Accessories
Upgrade to the Blue Sea Accessories package to add the power distribution components designed to integrate with the mount.
Includes:
- (1) TEQ Customs SwitchPro Underhood Mount
- (2) 10mm Mounting Bolts
- (2) 1/2" Spacers – for applicable 2003–2009 4Runner models
- (1) Blue Sea Terminal Block with mounting hardware
- (1) Blue Sea Ground Bus Bar with mounting hardware
- (1) Ground Cable for Ground Bus Bar
SwitchPro system is not included with this package.
Complete Package
For a complete power management setup, select the Complete Package, which combines the TEQ Customs mount with the SwitchPro 9100 system and Blue Sea power distribution components.
Includes:
- (1) TEQ Customs SwitchPro Underhood Mount
- (2) 10mm Mounting Bolts
- (2) 1/2" Spacers – for applicable 2003–2009 4Runner models
- (1) SwitchPro 9100 System
- SwitchPro Power Module mounting hardware
- (1) Blue Sea Terminal Block with mounting hardware
- (1) Blue Sea Ground Bus Bar with mounting hardware
- (1) Ground Cable for Ground Bus Bar
Fitment
4Runner
-
For 4Runner (2003–2009)
- Some models may require the included 1/2" spacers.
-
For 4Runner (2010–2024)
-
2020+ models: The small factory relay box must be relocated toward the rear of the engine bay beside the brake booster.
FJ Cruiser
- For FJ Cruiser (2007–2014)
-
Does not fit manual transmission models due to interference with the clutch fluid reservoir.
GX470
GX460
What's Included
Contents depend on the package selected. Please refer to the Available Packages section above for the exact components included with each configuration.
Summary
The TEQ Customs Underhood SwitchPro / Power Distribution Mount for 4Runner, FJ Cruiser, GX470 & GX460 provides a clean foundation for building and organizing your vehicle's auxiliary electrical system.
With dedicated locations for a SwitchPro power module, Blue Sea terminal block, and ground bus bar, plus integrated wiring pass-throughs, the mount helps eliminate clutter and creates a centralized location for accessory connections. This makes wiring lights, compressors, communications equipment, and other powered accessories cleaner while making future additions and troubleshooting easier.
Constructed from heavy-duty 3/16" steel and finished in black powder coat, it's a durable and organized solution for everything from a basic SwitchPro installation to a complete underhood power distribution system.
